Geoconnect is a specialist GNSS Dealer and offers Rugged Computing and Software Solutions

VicMap Position – GPSnet

Vicmap Position – GPSnet™ is a positioning and navigation correction service for Global Navigation Satellite System (GNSS) users, throughout Victoria, Australia, and has two components:








Global Reliable Sub-Metre Accuracy

OmniSTAR VBS is the foundational “sub-metre” level of service. It is an L1 only, code phase pseudo-range solution. Pseudo-range correction data from OmniSTAR’s regional reference sites is broadcast via satellite link to the user receiver. These data are used, together with atmospheric modeling and knowledge of the receiver’s location, to generate an internal RTCM SC104 correction specific to that location. This correction is then applied to the real time solution. A typical 24-hour sample of OmniSTAR VBS will show a 2-sigma (95%) of significantly less than 1 metre horizontal position error and the 3-sigma (99%) horizontal error will be close to 1 metre.


15 cm Worldwide Service

OmniSTAR XP is a worldwide dual frequency high accuracy solution. It is a L1/L2 solution requiring a dual frequency receiver. Orbit and Clock correction data is used together with atmospheric corrections derived from the dual frequency data. By utilizing carrier phase measurement, very high accuracy can be achieved. OmniSTAR XP service provides short term accuracy of 1-2 inches and long term repeatability of better than 10 centimeters, 95%CEP. It is especially suited for Agricultural automatic steering systems. While it is slightly less accurate than OmniSTAR HP, it is available worldwide and its accuracy is a significant improvement over regional Differential Systems such as WAAS.



OmniSTAR G2 represents the most recent advancement in OmniSTAR subscription service offerings. It is a worldwide dual frequency high-accuracy solution which uses Orbit and Clock correction data. OmniSTAR G2 includes GLONASS satellites and GLONASS correction data in the solution. The addition of GLONASS to the solution significantly increases the number of satellites available which is useful when faced with conditions that limit satellite visibility, such as terrain, vegetation or buildings. OmniSTAR G2 service provides short-term accuracy of 1-2 inches and long term repeatability of better than 10 centimerers, 95%CEP. It is especially suited for operations in areas where trees or buildings may block the view of the sky and in areas affected by scintillation during times of high sunspot activity.


10 cm High Performance

The OmniSTAR HP service is the most accurate solution available. It is a L1/L2 solution requiring a dual frequency receiver. Data from OmniSTAR’s network of reference sites is utilized together with atmospheric corrections. Carrier phase measurement is used to maximize accuracy. OmniSTAR HP will usually have a 2-sigma (95%) horizontal error of about 6 centimetres and a 99% horizontal error of less than 10 centimetres. It is particularly useful for Agricultural Machine guidance and many surveying tasks. It operates in real time and without the need for local Base Stations or telemetry links. OmniSTAR HP is a true advance in the use of GPS for on-the-go precise positioning.

SmartnetAus Network RTK Corrections

Geoconnect has a variety of GIS Mapping and Surveying grade Subscriptions available, including Nation-wide and State-wide service.  Annual subscriptions are available for the heavy user and a range of monthly and hourly subscriptions for the casual or project users.

Our services are available 24/7 through secure NTRIP connections and are open to all data formats (RTCMv3.x,RTCMv2.x, CMR, etc), offering a GNSS RTK solution to anyone in the precision measurement marketplace.

Our real-time services are built on the powerful GNSS Spider software, providing high-precision, high-availabilityRTK corrections for any application, using any constellation – and it is available to everyone. GNSS Spider makes life easy for the user through its Nearest Base and Automatic Cell technologies, all the user has to do is choose to use either a single base or network RTK solution, and Spider does the rest!  By using the user’s approximate position, Spider can select the best base station(s) to use and optimise the RTK corrections for the rover’s current location.