This dual frequency compact Sonde can be used to trace drains, sewers and other non-conductive utilities. It acts like a signal transmitter and can be attached to a range of equipment including drain rods, boring tools and inspection cameras.

Applications

Once attached to a rod (or similar) the Sonde can be inserted and pushed along the utility under investigation. Using an EZiCAT cable locator to locate it on the surface, you can trace pipes which do not produce their own signal and which you are unable to apply a signal to (i.e. plastic pipe). The Sonde operates in both 8kHz and 33kHz modes and flashes a different colour depending on what mode it’s in, making it simple and easy to use.

The dual frequency Sonde is ideal for:

Tracing the path of a pipe or drain Locating blockages or collapses in drains Locating or tracing non-metallic pipes that don’t produce a signal. The depth range of the Sonde is up to 5 metres. Please Note: You will need to use a cable locator that has depth estimation on to get a depth reading.

Full spectrum of satellite signals, unlimited connectivity and the unique Tilt&Go functionality, all compressed in a compact GNSS make the Zenith35 series the GNSS that works when you do.

A corner of a building or even a gully under a parked car? Measure points where satellite signals are blocked by eaves or canopies? No problem with Zenith35 TAG – just Tilt&Go! Free yourself from working with your pole kept strictly vertical and tilt it up to 30°, and still maintaining GNSS accuracy.

Need to ensure you keep your pole vertical? The Zenith35 TAG warns you when outside your defined centring accuracy and documents the quality of your measurements. Remove complexity with access from any device connected to the internet, independent of your location. Connect up to 10 rovers simultaneously via GSM with Zenith35 DynDNS technology.